Gunite Spray Nozzleman

*Duties & Responsibilities* Operate the gunite/shotcrete spraying nozzle safely and efficiently. Assist with the setup, preparation, and dismantling of gunite/shotcrete spraying equipment. Carry out daily inspections of the nozzle, hoses, equipment, and related tools, and immediately report any damaged or unsafe equipment. Monitor the concrete mix, air pressure, water flow, and material delivery during spraying operations. Coordinate closely with the pump operator and other crew members during spraying operations. Control the nozzle angle, distance, and spray pattern to achieve proper and uniform application. Apply gunite/shotcrete to walls, ceilings, slopes, tunnels, pools, and other structures as required. Maintain the required material thickness and uniform coverage according to project specifications. Ensure reinforcement steel, mesh, anchors, and prepared surfaces are properly covered. Identify and correct areas with poor coverage, rebound, sagging, or uneven application. Minimize rebound and material wastage through proper nozzle technique and spraying methods. Inspect the sprayed surface and report defects, deficiencies, or other issues to the supervisor. Follow project specifications, approved method statements, drawings, and supervisor instructions. Follow all required health, safety, environmental, and PPE procedures. Work safely at height or in confined areas when required, following approved safety procedures. Clean and maintain the nozzle, hoses, equipment, and work area after completing spraying operations. Maintain good housekeeping around the spraying area at all times.