Rigger (Level 2)

• Ensure at all times that the load is under complete control through the correct use of tag lines or other necessary assistance. • Clearly indicate to the crane or mobile equipment operator where the load is to be moved or placed and, where practicable, follow each load to its destination. • Warn and coordinate with other personnel working in the vicinity of the lifting operation to ensure area control and exclusion compliance. • Stop the lifting or material handling operation immediately if anything unusual, unsafe, or unplanned occurs, and verify that conditions are safe before work resumes. • Participate in loading and offloading operations from and to trucks, vessels, supply boats, jetties, warehouses, yards, and holding areas as instructed by the Cargo Supervisor or Rigger. • Accompany mobile equipment operators (crane, forklift, tractor) to provide assistance during material handling operations, including fastening, securing, and accurate positioning of loads. • Carry out all rigging, slinging, load‑securing, and signalling activities strictly in accordance with approved lifting plans, risk assessments, and Permit to Work conditions. • Perform all lifting activities under the direction and supervision of the Senior Rigger (Level 3), Lifting Supervisor, or Appointed Person, as applicable. • Observe company safety rules and regulations, participate in safety and firefighting drills as assigned, and report accidents, near misses, equipment damage, malfunctions, or hazardous conditions immediately to the Supervisor. • Ensure work is suspended when environmental or weather conditions (e.g. wind, visibility, sea state) • Perform general housekeeping and environmental duties, including maintaining clean jetty and work areas and ensuring good housekeeping at all work sites. • Perform additional or related duties as assigned from time to time to meet operational requirements. • Participate only in the type, category, and complexity of lifting operations for which he is competent, Experience, Knowledge & Skills • Have a minimum of two (2) years’ experience, preferably within oil & gas or similar industrial environments. • Ability to read, write, and speak English at a level sufficient to understand lifting plans, risk assessments, Permit to Work requirements, procedures, hand signals, and safety communications, and to perform lifting activities safely. • Successful completion of a minimum 2-day Rigging and Slinging training course delivered by an ADNOC Group-approved Training Company using an approved Tutor, in accordance with ADNOC HSE-PSW-CP19 requirements. • Holding a valid Certificate of Competency (CoC) for Rigging and Slinging – Level 2, issued by an ADNOC Group-approved Training Company using an approved Tutor. • Undergo periodic reassessment every two (2) years, • The following additional qualifications • Basic Firefighting Certificate • Basic First Aid Certificate • Carriage of Dangerous, Hazardous and Harmful (DGH) Cargo Training • Signaller / Banksman Training